Engineering, 17.07.2019 23:40 ooEVAoo
An a-36 steel bar has a length of 50 in. and cross- sectional area of 0.7 in^2. determine the length of the bar it is subjected to an axial tension of 5000 lb. the material has linear-elastic behavior
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
Engineering, 04.07.2019 19:20
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
You know the right answer?
An a-36 steel bar has a length of 50 in. and cross- sectional area of 0.7 in^2. determine the length...
Questions
English, 20.01.2021 07:20
Mathematics, 20.01.2021 07:20
English, 20.01.2021 07:20
French, 20.01.2021 07:20
Mathematics, 20.01.2021 07:20
English, 20.01.2021 07:20
Mathematics, 20.01.2021 07:20
Mathematics, 20.01.2021 07:20
