subject

Write the algorithm for setting up to play a card game called Vaark. You are writing the algorithm for the dealer. Relevant rules of Vaark:
Is played by 4 people. The dealer is one of the four players.
Uses standard/poker/bridge deck of 52 playing cards
Cards must be shuffled and cut.
After cards are shuffled and cut, one person (the dealer) distributes cards one-card-at-a-time, in rotation, clockwise, face-down, so that each person receives six cards. The distribution should start with the person to the dealer’s left.
Remaining cards (after dealing) are placed in a pile face-down in the center of the table. This is the remainder deck.
Top card of the remainder deck is turned face-up and placed next to the remainder deck.
For purposes of this exercise, assume that:
dealer has been chosen
cards have already been shuffled and cut
dealer does not know what dealing is (you cannot use the term "deal" or "dealing"do not define dealing for the dealer….use other terms to convey the message)
dealer does not know what clockwise means(you cannot use the term "clockwise"do not define clockwise for the dealer….use other terms to convey the message)
dealer does know what face-up and face-down are
List any additional assumptions you must make. (for example….Does the physical position of the players make a difference in whether your algorithm will work ? if so, you may need to make an assumption about that)

ansver
Answers: 2

Another question on Computers and Technology

question
Computers and Technology, 22.06.2019 03:00
Data is processed, stored, and transmitted as a series of 1s and 0s. each 1 or 0 is called a(n) . a series of eight 0s and 1s, called a(n) , represents one character—a letter, number, or punctuation mark. data becomes when it is presented in a format that people can understand and use. digital signals are represented by two different , such as +5 volts and +.2 volts. digital data can also take the form of light and dark spots etched onto the surface of a cd or the positive and negative orientation of particles on the surface of a hard disk. data consists of numbers that might be used in arithmetic operations. it can be represented digitally using the number system. data is composed of letters, symbols, and numerals that are not used in arithmetic operations. computers represent this type of data using , ebcdic, unicode, or utf-8. data is quantified using terms such as or kibibyte (1024 bytes), and prefixes such as or mebi (1,048,576), and giga or (1,073,741,824). to reduce file size and transmission times, digital data can be compressed. compression provides the means to compress data and reconstitute it into its original state. compression throws away some of the original data during the compression process. compressed files usually have at the end of the file name and are represented with special icons. these files have to be or unzipped before you can view the data they contain.
Answers: 1
question
Computers and Technology, 22.06.2019 05:00
Pls do you believe that the use of 3d animation has grown in feature films over the last few years? if so, do you think the trend will continue? what are the forces driving this trend?
Answers: 2
question
Computers and Technology, 22.06.2019 12:20
Usually, when we sniff packets, we are only interested certain types of packets. we can do that by setting filters in sniffing. scapy’s filter use the bpf (berkeley packet filter) syntax; you can find the bpf manual from the internet. set the following filters and demonstrate your sniffer program again (each filter should be set separately): (a) capture only the icmp packet. (b) capture any tcp packet that comes from a particular ip and with a destination port number 23. (c) capture packets comes from or to go to a particular subnet. you can pick any subnet, such as 128.230.0.0/16; you should not pick the subnet that your vm is attached to.
Answers: 3
question
Computers and Technology, 22.06.2019 14:10
Dean wants a quick way to look up staff members by their staff id. in cell q3, nest the existing vlookup function in an iferror function. if the vlookup function returns an error result, the text “invalid staff id” should be displayed by the formula. (hint: you can test that this formula is working by changing the value in cell q2 to 0, but remember to set the value of cell q2 back to 1036 when the testing is complete.)
Answers: 3
You know the right answer?
Write the algorithm for setting up to play a card game called Vaark. You are writing the algorithm f...
Questions
question
Mathematics, 24.11.2020 01:00