Physics, 21.07.2019 15:30 guazet7650

Acertain part of the electromagnetic spectrum ranges from 200 nm to 400 nm. what is the lowest frequency associated with this portion of the spectrum? (c 3.00 108 m/s)

Answers: 1

Show answers

Answers

The lowest and highest wavelengths of this part of the electromagnetic spectrum are:
$\lambda_1 = 200 nm=200 \cdot 10^{-9} m$
$\lambda_2 = 400 nm = 400 \cdot 10^{-9} m$

We can calculate the corresponding frequencies by using:
$f= \frac{c}{\lambda}$
where c is the speed of light. If we use this equation, we find:
$f_1 = \frac{c}{\lambda_1}= \frac{3 \cdot 10^8 m/s}{200 \cdot 10^9 m} =1.5 \cdot 10^{15}Hz$
$f_2 = \frac{c}{\lambda_2}= \frac{3 \cdot 10^8 m/s}{400 \cdot 10^9 m} =7.5 \cdot 10^{14}Hz$
Therefore, the lowest frequency associated with this portion of the spectrum is
$f_2 = 7.5 \cdot 10^{14} Hz$

Answer from: Quest

quantum mechanics or quantum physics is physics of very small objects (particles) and physical entities.

quantum physics has some parallels to our macro world and some pretty unique ideas which theoretically and mathematically proven to be true even though we will never be able to access them because of our size.

there are many types of particles: subatomic, elementary etc.

subatomic means they are smaller than atom, elementary means they are at the very basis of everything.

subatomic particles are for eg. protons, neutrons but not electrons.

elementary particles are categorised into 3 groups by what they do.

these 3 groups are quarks, leptons and bosons.

light for example is a particle more precisely a photon a part of leptons.

proton (subatomic particle) is made out of 2 up quarks and 1 down quark each of these has a fractional charge like $\frac{1}{3}$ . (i crazy)

most famous scientist who contributed to this physics are:

max planckalbert einsteinerwin schrödingermany

the topic itself us understand a lot and will probably be vastly used in the future (quantum computers, understanding the big bang,

we also must not forget quantum effects like:

superposition (where 1 thing can be this and that at the same time),entanglement (where two particles are seemingly connected by some sort of unknown (or known) force, energy, matter (i know all that can be the same at least it was at the beginning)

and there is more. but probably too much for this answer to be consistent due to my average understanding of this topic.

hope this you understand quantum mechanics a little more. i'm not an expert in the topic (so don't be like wth if you are an expert) but i'm very interested in it.

anyways quantum physics is a very hard topic (harder than physics (perhaps)) therefore searching for every information there is about it and learning it is unfortunately impossible (you can only specialise into 1 - 3 things or more (perhaps

have fun and i wish you luck!

r3t40

Answer from: Quest

Ithink they do have the same properties just in less quantities i think

Another question on Physics

Physics, 21.06.2019 16:30

Picture a all traveling at a constant speed around the inside of a circular structure. is the ball accelerating? explain your answer

Answers: 3

Answer

Physics, 21.06.2019 19:00

Adelivery truck leaves a warehouse and travels 2.60 km north. the truck makes a left turn and travels 1.25 km west before making another right turn to travel 1.40 km north to arrive at its destination. what is the magnitude and direction of the truck's displacement from the warehouse?

Answers: 2

Answer

Physics, 22.06.2019 03:10

Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.

Answers: 2

Answer

Physics, 22.06.2019 05:40

Two polarizers are oriented at 40∘ to each other and plane-polarized light is incident on them. if only 16 percent of the light gets through both of them, what was the initial polarization direction of the incident light?

Answers: 2

Answer

You know the right answer?

Acertain part of the electromagnetic spectrum ranges from 200 nm to 400 nm. what is the lowest frequ...

Questions