Which one of the following is not a simple machine?
a. lever
b. pulley
c. hammer
d. inclined plane

Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.

What are the similarities & differences between a thermistor and a light dependent resistor in physics?

Aball is thrown vertically upwards from the top of a tower with a speed of 100m/s.it strikes the pound near the base of the tower after 25sec . the height of the tower is