Physics, 09.02.2022 01:50 deannabrown2293

Two blocks are arranged at the ends of a massless cord over a frictionless massless pulley as shown in the figure. Assume the system starts
from rest. When the masses have moved a distance of 0.433 m, their speed is 1.32 m/s.
The acceleration of gravity is 9.8 m/s
2
.
4 kg
2.6 kg
µ
What is the coefficient of friction between
m2 and the table?

Answers: 1

Show answers

Another question on Physics

Physics, 21.06.2019 15:40

Translation can be considered to have three phases or steps: initiation, protein synthesis, and termination. give a detailed summary of the factors and molecules involved with each step and, where appropriate, compare/contrast the differences between prokaryotic and eukaryotic translation.

Answers: 1

Answer

Physics, 22.06.2019 03:50

The force acting on a beam was measured under the same operating conditions and a sample of 5 data points was collected. this process was repeated by 3 observers. the pooled standard deviations of these 3 data sets was 1.21. determine the true mean force using all pooled data (with a 95% probability). the result should look like this: true mean = mean +/- margin of error

Answers: 1

Answer

Physics, 22.06.2019 12:30

Cathy is pedaling down a steep hill on her bicycle and wants to be able to coast up the next hill, which is 25 meters high, without pedaling. cathy and her bicycle have a mass of 75 kg. assuming her bicycle is 100% efficient, what would her speed have to be?

Answers: 3

Answer

Physics, 22.06.2019 14:20

4r-134a enters the condenser of a residential heat pump at 800 kpa and 50°c at a rate of 0.022 kg/s and leaves at 750 kpa subcooled by 3°c. the refrigerant enters the compressor at 200 kpa superheated by 4°c determine (a) the isentropic efficiency of the compressor, (b) the rate of heat supplied to the heated room, and (c) the cop of the heat pump. also, determine (d) the cop and rate of heat supplied to the heated room if this heat pump operated on the ideal vapor-compression cycle between the pressure limits of 200 and 800 kpa. (0.757, 4.37 kw, 5.12, 6.18, 3.91 kw)

Answers: 3

Answer

You know the right answer?

Two blocks are arranged at the ends of a massless cord over a frictionless massless pulley as show...

Questions