[(i) 8.11 Two plates, each 5 mm thick, are connected by means of four rivets as shown in Fig. 8.79. The permissible stresses for rivets (v. 5 8.77, IS -500 N eximum exceed 15 을 F - 15 KN P = 15 KN P = 175 KN 4 mm Fig. 8.79 ; is fa 8.13 A dou used thickn rivets to ind and plates in tension, shear and compression are 80, 60 and 120 N/mm² respectively Calculate: (i) diameter of the rivets; (ii) width of the plate; and (iii) efficiency of the joint. [(i) 8.92 or 9 mm (ii) 46.5 or 50 mm (iii) 76.34% and pl es$ stresse are 80 Deten

2.22/3.33 points | previous answers tamucolphysmechl1 4.pre.002. ask your teacher my notes question part points submissions used on a frictionless air track, a blue glider with mass 0.200 kg is moving to the right with a speed of 8.00 m/s. it strikes a red glider that has mass 0.600 kg and that is initially at rest. after the collision, the blue glider is moving to the left with a speed of 2.40 m/s. (a) what are the magnitude and direction of the velocity of the red glider after the collision? magnitude 3.33 m/s correct: your answer is correct. direction correct: your answer is correct. (b) is this collision elastic?

Which type of basaltic lava flow has a fairly smooth

A0.750 kg aluminum pan is removed from the stove and plunged into a sink filled with 10.0 kg of water at 293 k. the water temperature quickly rises to 297 k. what was the initial temperature of the aluminum pan? the specific heat of aluminum is ca = 900 j/(kgk) and water is cw = 4190 j/(kgk)