Which element gives up its valence electrons most readily? (1 point)

Fr
Fr

Ar
Ar

Bi
Bi

Be

Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.

Which of the following is not a means to accelerating? question 4 options: a)increase speed b)remain still c)decrease speed d)change direction

Aforce of 40n applied at the end of length 4m and diameter 2.00mm process and extension of 0.24mm,calculate the stress on the wire, strain in the wire and the young modulus for the material of the wire