The flat base of the bottom of an electric water heater is made of a 2 mm thick steel plate. thermal conductivity of 40 W/(m. oC), and an insulating plate with a thickness of 4 mm and thermal conductivity of 0.06 W/(m. oC). Between the steel and insulating plates there is an electrical resistance (RE) that dissipates a power of 800 W. Consider the steady state situation with boiling water at a temperature of 100 oC and with a coefficient of heat transfer by convection of 3000 W/(m2. oC), while the ambient air, which is in contact with the insulator, it remains at a temperature of 25oC and a convection heat transfer coefficient of 10 W/(m2.oC).

Considering a perfect thermal contact between the electrical resistance and the steel and insulating sheets and that the base of the heater has an area of 0.018 m2, determine:

a) The temperature (TR) of the electrical resistance;

b) The rate of heat lost to the air through of the insulating plate;

ç). The rate of heat lost to water through the steel plate.

Part f - example: finding two forces (part i) two dimensional dynamics often involves solving for two unknown quantities in two separate equations describing the total force. the block in (figure 1) has a mass m=10kg and is being pulled by a force f on a table with coefficient of static friction îľs=0.3. four forces act on it: the applied force f (directed î¸=30â above the horizontal). the force of gravity fg=mg (directly down, where g=9.8m/s2). the normal force n (directly up). the force of static friction fs (directly left, opposing any potential motion). if we want to find the size of the force necessary to just barely overcome static friction (in which case fs=îľsn), we use the condition that the sum of the forces in both directions must be 0. using some basic trigonometry, we can write this condition out for the forces in both the horizontal and vertical directions, respectively, as: fcosî¸â’îľsn=0 fsinî¸+nâ’mg=0 in order to find the magnitude of force f, we have to solve a system of two equations with both f and the normal force n unknown. use the methods we have learned to find an expression for f in terms of m, g, î¸, and îľs (no n).

What is the scientific definition of energy that relates to work

Describe cytokinesis in plants and animals. in animals: in plants.