subject
Physics, 03.12.2021 04:10 karenpazyuli

A ladder is at rest with its upper end against a wall and its lower end on the ground. A worker is about to climb it. When is it more likely to slip? (a) before the worker is on.

ansver
Answers: 3

Another question on Physics

question
Physics, 21.06.2019 22:10
Which fators influence ocean currents
Answers: 1
question
Physics, 22.06.2019 02:50
20. threshold braking in the vehicle's braking system occurs when a. the brake pedal is pushed, heel on floorboard, with full foot pressure. b. the brakes are exerting full braking power, without traction loss. c. the driver begins pushing down the brake pedal, with moderate slowdown. d. the brakes just begin to take hold with a gradual slowdown.
Answers: 3
question
Physics, 22.06.2019 12:50
Air is contained in a variable-load piston-cylinder device equipped with a paddle wheel. initially, air is at 400 kpa and 17°c. the paddle wheel is now turned by an external electric motor until 75 kj/kg of work has been transferred to air. during this process, heat is transferred to maintain a constant air temperature while allowing the gas volume to triple. calculate the required amount of heat transfer in kj/kg.
Answers: 2
question
Physics, 22.06.2019 15:30
At 20∘c, the hole in an aluminum ring is 2.800 cm in diameter. you need to slip this ring over a steel shaft that has a room-temperature diameter of 2.804 cm . 1. to what common temperature should the ring and the shaft be heated so that the ring will just fit onto the shaft? coefficients of linear thermal expansion of steel and aluminum are 12×10−6 k−1 and23×10−6 k−1 respectively.
Answers: 1
You know the right answer?
A ladder is at rest with its upper end against a wall and its lower end on the ground. A worker is a...
Questions
question
Mathematics, 07.12.2021 20:00
question
Health, 07.12.2021 20:00