Why is it important that all the samples in a given assay be of the same volume before reading their absorbance?.

When using the scientist method, which step comes last?

Consider a u-tube whose arms are open to the atmosphere. now equal volumes of water and light oil (ρ = 49.3 lbm/ft3) are poured from different arms. a person blows from the oil side of the u-tube until the contact surface of the two fluids moves to the bottom of the u-tube, and therefore, the liquid levels in the two arms are the same. if the fluid height in each arm is 30 in, determine the gage pressure exerted by the person on the oil by blowing.

Find the steady-state temperature at the center of the plate = /2, = /2) for sums of w from n=1 to n=19 (only odd values). find the value of n for which the change in /2, /2) is less than 1% from the value at the previous n. at this point, we consider the solution converged. does the value of the temperature at the center seem reasonable? in this part, the values of x and y are constant scalar values. you should produce a plot of the value of n on the horizontal and the estimate of the temperature at the center of the plate on the vertical. b. using the value of n (or larger) that resulted in convergence in part (a), create a contourf plot of the temperature distribution across the entire plate. use enough spatial subdivisions to create a useful plot. comment on the results. hint: you need to determine what “x” and “y” values to use to make your t matrix. i recommend using a different number of x and y values. use enough x and y values so that the plot is “smooth”.