How is friction and temperature related?

Subject - Science

With friction time increased, temperature rises during the dry sliding process and results in performance degradation and unstable friction properties, which is different with the result of environment temperature.

Explanation:

LET ME KNOW IN THE COMMETS IF THIS HELPS PLZ HAVE A GREAT DAY AND CAN YOU PLZ MARK BRAINLIEST?

Friction is an everyday force that is created by two surfaces interacting. When these surfaces slide against eachother, this interaction increases the thermal energy of the two surfaces (the temperature goes up). The coefficient of friction is found to be strongly dependent on temperature and decreases continuously from 0.78 to 0.46 between 24° C and 450° C

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

answer: the metamorphic rocks are formed when they are exposed to high pressure and high temperatures. this happens when one of the earth's plates comes in contact with the other plate by traveling in opposite directions, straight into each other or slipping under one another. the friction that is caused by this activity results in   melting of rocks and when it cools they are known as metamorphic rocks. this process needs a controlled amount of pressure and temperature otherwise it may turn into magma.