Physics, 03.09.2021 07:30 hannahliebl2000

A long spanner is used to unscrew the tight nut why

Answers: 3

Show answers

Another question on Physics

Physics, 21.06.2019 14:40

An implanted pacemaker supplies the heart with 72 pulses per minute, each pulse providing 6.0 v for 0.65 ms. the resistance of the heart muscle between the pacemaker’s electrodes is 550 ω. find (a) the current that flows during a pulse, (b) the energy delivered in one pulse, and (c) the average power supplied by the pacemaker.

Answers: 3

Answer

Physics, 22.06.2019 01:10

Asteam power plant operates on an ideal reheat rankine cycle between the pressure limits of 15 mpa and 10 kpa. the mass flow rate of steam through the cycle is 12 kg/s. steam enters both stages of the turbine at 500°c. if the moisture content of the steam at the exit of the low-pressure turbine is not to exceed 10 percent, determine (a) the pressure at which reheating takes place, (b) the total rate of heat input in the boiler, and (c) the thermal efficiency of the cycle. also, show the cycle on a t-s diagram with respect to the saturation lines. (2.15 mpa; 45.0 mw; 42.6%)

Answers: 3

Answer

Physics, 22.06.2019 22:00

Hat is the most commonly cited cause of occupational injuries in the healthcare sector? a. repositioning of patients b. manual pipetting c. slips and trips d. workplace violence

Answers: 3

Answer

Physics, 23.06.2019 00:00

You are a researcher for a golf club manufacturer. you are given two identical looking cubes of a metal alloy. you are informed that they are made of the exact same material, but one is crystalline, whereas the other is amorphous. it is your job to determine which one is amorphous this one is more stress-resistant and is useful in reinforcing golf clubs. which of the following is the best way to determine which is which? a. determine the density of each cube. the more dense one is the amorphous solid. b. melt both cubes and look for a broader range of melting temperatures. the one that melts over a broader range of temperatures is the amorphous solid. c. determine the density of each cube. the less dense cube is the amorphous solid. d. melt both cubes and measure the range of melting temperatures. the one that melts over a narrower range of temperatures is the amorphous solid.

Answers: 1

Answer

You know the right answer?

A long spanner is used to unscrew the tight nut why...

Questions