The nichrome heating element in an electric drier operates on 240 V and generates heat at the rate of 2.0 kW. The heating element shorts out and, in repairing it, the repairman shortens the nichrome wire by 10%. (Assume the temperature is unchanged. In reality, the resistivity of the wire will depend on its temperature.) What effect will the repair have on the power dissipated in the heating element

Orque can be calculated by multiplying the force (n) applied at 90? to the lever arm at a distance (m) from the pivot point (point of rotation), the compound si unit for the torque is n? m. if the force (at 90? to the lever arm) applied is 15 n and it is applied at 2.0 m from the pivot point (point of rotation), what is the torque on the lever?

An incident ray through the focal point of a spherical mirror will: reflect through the center of curvature. reflect back through the focal point. reflect parallel to the principle axis. reflect the same direction as the incident ray.

Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.