subject
Physics, 26.08.2021 02:30 jmwmarshall

Would Democritus recognize the modern atomic model as his own theory? A: Yes, the current atomic model is similar to Democritus's model.
B: Yes, the idea of an atom remains the same even though the
model has changed.
C: No, Democritus thought that atoms were indivisible, but the
current model has subatomic particles.
D: No, Democritus thought that atoms did not have mass, but the
current model can measure atomic mass.

ansver
Answers: 2

Another question on Physics

question
Physics, 22.06.2019 17:30
Atruck driver is attempting to deliver some furniture. first, he travels 8 km east, and then he turns around and travels 3 km west. finally, he turns again and travels 13 km to his destination. what is the drivers total displacement?
Answers: 1
question
Physics, 22.06.2019 19:30
If the area of a square has increased by a factor of 16, by how much has each side increased?
Answers: 3
question
Physics, 23.06.2019 05:30
The reason a penny thrown straight up inside a bus will come back to your hand is that you,the bus,the air inside the bus, and the penny are all moving at the same velocity. true or false
Answers: 2
question
Physics, 23.06.2019 08:30
Atension test was conducted on a specimen of aisi 1020 hot-rolled steel having an initialdiameter of 9.11 mm. representative test data are given in table1in the form of force and engineering strain. for strain the extensometer gage length was li= 50.8 mm. in addition, minimumdiameters were measuredmanually with a micrometer in the necked region at several points during the test. after fracture, thebroken halves were reassembled, and the following measurements were made: (1) marks originally 25.4 mm apart and on opposite sides of the necked regionwere 38.6 mm apart due to the lengthwise stretching in the specimen; (2) similar marks originally 50.8 mm apart were 70.9 mmapart; (3) the final minimum diameter in the necked region was 5.28 mma) determine the following material properties: elastic modulus, 0.2% offset yield strength, ultimate tensile strength, percent elongation, and percent reduction in area. b) assume that the test was interrupted upon reaching a strain u = 0.007, and the specimen unloaded to zero force. estimate the elastic strain recovered and the plastic strain remaining. also, what would the new length of the original 50.8 mm gage section. hint: might save time/effort to use excel, mathcad, matlab, etc. to solve part a)table1 data and analysis for a tension test on aisi 1020 hot-rolled steeltest dataforce (p, kn)1. 0.002. 6.673. 13.344. 19.135. 17.796. 17.217. 17.538. 17.449. 17.2110. 20.7711. 24.2512. 25.7113. 25.7514. 25.0415. 23.4916. 21.3517. 18.9018. 17.39engr. strain (ε)1. 02. 0.00053. 0.00104. 0.00155. 0.00236. 0.00317. 0.00508. 0.00709. 0.010010. 0.049011. 0.125012. 0.218013. 0.234014. 0.306015. 0.330016. 0.348017. 0.360018. 03660diameter (d, mm)1. 9.112. 9.113. 9.114. 9.115. 9.116. 9.117. 9.118. 9.119. 9.1110. 8.8911. 8.8912. 8.2613. 8.2614. 7.6215. 6.9916. 6.3517. 5.7218. 5.28
Answers: 2
You know the right answer?
Would Democritus recognize the modern atomic model as his own theory? A: Yes, the current atomic m...
Questions
question
Mathematics, 10.11.2020 20:00
question
History, 10.11.2020 20:00
question
Mathematics, 10.11.2020 20:00