subject
Physics, 09.08.2021 14:00 punani

Vật lý 12 em mới học mong mọi người giúp ạ


Vật lý 12 em mới học mong mọi người giúp ạ

ansver
Answers: 1

Another question on Physics

question
Physics, 21.06.2019 17:00
Trumpeter a holds a b-flat note on the trumpet for a long time. person c is running towards the trumpeter at a constant velocity. person b is running away from the trumpeter at the same rate. person d is standing still the whole time. which person hears a frequency that is lower than the b-flat?
Answers: 1
question
Physics, 21.06.2019 22:00
Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)
Answers: 1
question
Physics, 22.06.2019 12:50
The heliocentric and the geocentric models of the solar system included these central principles
Answers: 1
question
Physics, 22.06.2019 16:50
Consider the growth of a 20-nm-diameter silicon nanowire onto a silicon wafer. the temperature of the wafer surface is maintained at 2400 k. assume the thermal conductivity of the silicon nanowire is 20 wm-1k-1 and all its surfaces including the tip are subjected to convection heat transfer with the coefficient h = 1×105 wm-2k-1 and t∞ = 8000 k. when the nanowire grows to l = 300 nm, what is the temperature of the nanowire tip (t (x =
Answers: 1
You know the right answer?
Vật lý 12 em mới học mong mọi người giúp ạ
...
Questions
question
Mathematics, 22.03.2021 15:30
question
Mathematics, 22.03.2021 15:30
question
English, 22.03.2021 15:30
question
Mathematics, 22.03.2021 15:30
question
Mathematics, 22.03.2021 15:30