subject
Physics, 03.07.2021 23:50 tami490

cylindrical specimen of steel having an original diameter of 12.8 mm (0.505 in.) is tensile-tested to fracture and found to have an engineering fracture strength o, of 460 MPa (67.000 psi). If its cross-sectional diameter at fracture is 10.7 mm (0.422 in ), determine:

ansver
Answers: 1

Another question on Physics

question
Physics, 21.06.2019 22:50
Calculate the heat capacity per object when the total energy is 4 quanta. (think of this in terms of increasing from 3.5 quanta of energy in the system to 4.5 quanta of energy in the system, if that were possible.) c4 = __ j/k/object
Answers: 2
question
Physics, 22.06.2019 10:40
As you are trying to move a heavy box of mass m, you realize that it is too heavy for you to lift by yourself. there is no one around to , so you attach an ideal pulley to the box and a massless rope to the ceiling, which you wrap around the pulley. you pull up on the rope to lift the box. use g for the magnitude of the acceleration due to gravity and neglect friction forces. once you have pulled hard enough to start the box moving upward, what is the magnitude f of the upward force you must apply to the rope to start raising the box with constant velocity? express the magnitude of the force in terms of m, the mass of the box.
Answers: 1
question
Physics, 22.06.2019 17:50
If there's a small amount of friction between two surfaces, the result could be select all that applya. no movement b. heatc. a little bit of movementd. sliding around
Answers: 2
question
Physics, 22.06.2019 19:00
The friction of the water on a boat produces an acceleration of -10. m/s2. if the boat is traveling at 30. m/s and the motor is shut off, how long it take the boat to slow down to 5.0 m/s?
Answers: 1
You know the right answer?
cylindrical specimen of steel having an original diameter of 12.8 mm (0.505 in.) is tensile-tested t...
Questions
question
Mathematics, 15.12.2020 01:00
question
Mathematics, 15.12.2020 01:00