subject
Physics, 29.06.2021 15:10 areanna02

A sled that has a mass of 8 kg is pulled at a 50 degree angle with a force of 20 N. The force of friction acting on the sled is 2.4 N. The free-body diagram shows the forces acting on the sled. A free body diagram with 4 force vectors. The first vector is pointing downward, labeled F Subscript g Baseline. The second vector is pointing up to the right at an angle of 50 degrees, labeled F Subscript p Baseline. The third vector is pointing upward, labeled F Subscript N Baseline. The fourth vector is pointing left, labeled F Subscript f Baseline. The up and down vectors are the same length. The right vector is longer than the left vector.

What is the acceleration of the sled and the normal force acting on it, to the nearest tenth?

A) a = 1.3 m/s^2; FN = 63.1 N
B) a = 1.6 m/s^2; FN = 65.6 N
C) a = 1.9 m/s^2; FN = 93.7 N
D) a = 2.2 m/s^2; FN = 78.4 N

please don't just guess:(


A sled that has a mass of 8 kg is pulled at a 50 degree angle with a force of 20 N. The force of fr

ansver
Answers: 3

Another question on Physics

question
Physics, 21.06.2019 20:50
What is the type of the reaction below? bacl2 + h2so4 → 2 hci + baso4 double replacement synthesis single replacement decomposition
Answers: 1
question
Physics, 22.06.2019 10:00
The rocket is fired vertically and tracked by the radar station shown. when θ reaches 66°, other corresponding measurements give the values r = 32700 ft, r¨ = 85 ft/sec2, and θ˙ = 0.019 rad/sec. calculate the magnitudes of the velocity and acceleration of the rocket at this position.
Answers: 3
question
Physics, 22.06.2019 20:40
Newtons view of arrangement of the universe. don't copy from anywhere.
Answers: 3
question
Physics, 22.06.2019 20:50
An ideal otto cycle has a compression ratio of 8. at the beginning of the compression process, air is at 95 kpa and 27°c, and 750 kj/kg of heat is transferred to air during the constant-volume heat-addition process. assuming constant specific heats at room temperature, determine (a) the pressure and temperature at the end of the heat-addition process, (b) the net work output, (c) the thermal efficiency, and (d) the mean effective pressure for the cycle. (4390 kpa, 1730 k; 423 kj/kg; 56.4%; 534 kpa)
Answers: 1
You know the right answer?
A sled that has a mass of 8 kg is pulled at a 50 degree angle with a force of 20 N. The force of fri...
Questions