For the normal force in the drawing to have the same magnitude at all points on the vertical track, the stunt driver must adjust the speed to be different at different points. Suppose, for example, that the track has a radius of 3.25 m and that the driver goes past point 1 at the bottom with a speed of 20.2 m/s. What speed must she have at point 3, so that the normal force at the top has the same magnitude as it did at the bottom

The speed she must have at point 3 is approximately 21.72 m/s

Explanation:

The given parameters are;

The radius of the track, r = 3.25 m

The speed with which the driver goes past point 1, v₁ = 20.2 m/s

Let, 'm', represent the mass of the driver and the car, and let v₃ represent the velocity at point 3, based on the diagram and solution method from a similar question online, we have;

At point 1, The net force,

The net force, , is the centrifugal force, therefore;

= The force of gravity on the car (the weight of the car) = m·g

= The normal reaction at point 1

Therefore, we have;

At point 3, The net force,

Where;

= The normal reaction at point 3

Therefore;

For the normal force to be the same, we get;

Therefore;

Where;

g = The acceleration due to gravity ≈ 9.81 m/s²

Therefore;

v₃ = √(20.2² + 2 × 9.81 × 3.25) ≈ 21.72 m/s

The speed she must have at point 3, so that the normal force at the top has the same magnitude as it did at the bottom, v₃ ≈ 21.72 m/s

spectral lines lyman is one set

the motion of a pendulum is a classic example of mechanical energy conservation. a pendulum consists of a mass (known as a bob ) attached by a string to a pivot point. as the pendulum moves it sweeps out a circular arc, moving back and forth in a periodic fashion.