Two balanced three phase loads are connected in parallel, the loads are L= 30 kVA at 0.9 pf lag, and L2= 40 kW at 0.795 pf lag. The loads are fed from a distribution line with an impedance of 0.1+j0.1 92/0. The line to neutral voltage at the load end is 288 V
and zero phase shift, the phase voltage of the source Vs in V is;
O A. 300.80-j2.71
O B. 300.80+j2.71
O C. None
O D.-275.20-22.71
O E.-275.20+12.71
Two balanced three phase loads are connected in parallel, the loads are Lī= 30 kVA at 0.9 pf lag, and L2= 40 kW at 0.795 pf lag.
The loads are fed from a distribution line with an impedance of 0.1+0.1 0/0. The line to neutral voltage at the load end is 288 V
and zero phase shift, the impedance of first load in 12 (if it is Y-connected) is;
on
O A None
O B.7.46+j3.62
O C.22.39-j10.85
O D. 22.39+j10.85
O E 746-73.62​

We all use gps today, even if we don't drive yet. i bet you have been in the car with a parent and they have asked you to get out your phone to find a specific location. in your car, on the phone, you are using a very sophisticated technology. gps satellites circle the earth twice a day in a very precise orbit and transmit signal information to earth. gps receivers take this information and use trilateration to calculate the user's exact location. essentially, the gps receiver compares the time a signal was transmitted by a satellite with the time it was received. the time difference tells the gps receiver how far away the satellite is. now, with distance measurements from a few more satellites, the receiver can determine the user's position and display it on the unit's electronic map. what type of signal is utilized by the gps satellite?

Acar traveling at 22 m/s starts to decelerate steadily. it comes to a complete stop in 15 seconds. what is it’s acceleration?

Apulley with mass mp and a radius rp is attached to the ceiling, in a gravity field of 9.81 m/s2 and rotates with no friction about its pivot.