subject
Physics, 05.06.2021 17:50 misslux

. Measure: Turn on Show grid. Place object A on the x axis at -20 and object B on the x axis at 20. The force on object A is now 0.0417i + 0j N. That means that the force is 0.0417 newtons in the x direction (east) and 0.0 newtons in the y direction (north). A. What is the magnitude of the force on object A? |FA| = B. What is the magnitude of the force on object B? |FB| =

ansver
Answers: 1

Another question on Physics

question
Physics, 22.06.2019 04:30
Acrow drops a 0.11kg clam onto a rocky beach from a height of 9.8m. what is the kinetic energy of the clam when it is 5.0m above the ground? what is its speed at that point?
Answers: 1
question
Physics, 22.06.2019 14:30
Give one example to show that when substances are mixed,it may result in a chemical or a physical change depending on the conditions.
Answers: 2
question
Physics, 22.06.2019 16:50
Acommercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -35°c by rejecting waste heat to cooling water that enters the condenser at 18°c at a rate of 0.25 kg/s and leaves at 26°c. the refrigerant enters the condenser at 1.2 mpa and 50°c. if the compressor consumes 3.3 kw of power, determine (a) the mass flow rate of the refrigerant, (b) the refrigeration load, (c) the cop, and (d) the minimum power input to the compressor for the same refrigeration load.
Answers: 2
question
Physics, 23.06.2019 08:00
Use henry's law and the solubilities given below to calculate the total volume of nitrogen and oxygen gas that should bubble out of 1.7 l of water upon warming from 25 Ëšc to 50 Ëšc. assume that the water is initially saturated with nitrogen and oxygen gas at 25 Ëšc and a total pressure of 1.0 atm. assume that the gas bubbles out at a temperature of 50 Ëšc. the solubility of oxygen gas at 50 Ëšc is 27.8 mg/l at an oxygen pressure of 1.00 atm. the solubility of nitrogen gas at 50 Ëšc is 14.6 mg/l at a nitrogen pressure of 1.00 atm. assume that the air above the water contains an oxygen partial pressure of 0.21 atm and a nitrogen partial pressure of 0.78 atm.
Answers: 2
You know the right answer?
. Measure: Turn on Show grid. Place object A on the x axis at -20 and object B on the x axis at 20....
Questions
question
Mathematics, 10.02.2021 18:00
question
Mathematics, 10.02.2021 18:00
question
Mathematics, 10.02.2021 18:00
question
Engineering, 10.02.2021 18:00
question
Mathematics, 10.02.2021 18:00