A capacitor is made by taking two sheets of aluminum foil, each 0.022 mm thick and placing between them a sheet of paper which comes from a ream of 500 sheets, the ream being 5.5 cm thick with sheets measuring 216 mm by 279 mm. What is the capacitance of the capacitor made this way if the dielectric constant of the paper is 3.7? THE ANSWER SHOULD BE (18nF)

Aball is thrown straight up into the air with a speed of 21 m/s. if the ball has a mass of 0.1 kg, how high does the ball go? acceleration due to gravity is g = 9.8 m/s^2. a. 22.5 m b. 20.0 m c. 25.0 m d. 17.5 m

For problems 1-3, consider a simple dc brush motor with a permanent magnet stator. with an an consider a simple dc brush motor with a permanent magnet ae supply voltage of 100 v, the no-load speed of the motor is 1000 rpm. this motor can provide a torque of 1.9 n-m at 800 rpm drawing a current of 2 a current are both zero at no load.) 1. with an armature supply voltage of 100 v, the motor is operated at 900 rpm. what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input? what is the energy efficiency of the motor? with an armature supply voltage of 100 v, the motor is operated at 1100 rpm (where it acts as a generator). what torque input is required? what mechanical power is required what current is generated? what is the electrical power generated? what is the energy efficiency of the motor acting as a generator? 2. with an armature supply voltage raised to 120 v, the motor is operated at 1000 rpm. what is the no-load speed? what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input what is the energy efficiency of the motor? 3.

Gather reliable information to brent make his decision. to gather this information, use newspapers, call insurance companies or look at their web sites, and review consumer magazines and web sites. also, look at the manufacturer web site or for information about gas mileage. list the sources you use and take notes.