CAN SOMEONE PLEASE HELP FIGURE THIS OUT PLEASE

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

An ideal gas is held in a container at constant volume. initially, its temperature is 5 degrees c and its pressure is 1.2 atm. what is its pressure when its temperature is 43 degrees c? answer in units of atm

Aspecified volume of space contains an electric field for which the magnitude is given by e=e0cos(ωt). suppose that e0 = 20 v/m and ω = 1.0 × 107 s−1. part a what is the maximum displacement current through a 0.80 m2 cross-sectional area of this volume? express your answer with the appropriate units. idisp,max i d i s p , m a x = nothing nothing request answer part b how would this area have to be oriented relative to the electric field to get this maximum displacement current?