Physics, 30.04.2021 17:00 juanitarodrigue

Transverse thrusters are used to make large ships fully maneuverable at low speeds without tugboat assistance. A transverse thruster consists of a propeller mounted in a duct; the unit is then mounted below the waterline in the bow or stern of the ship. The duct runs completely across the ship. Calculate the thrust developed by a 1900 kW unit supplied to the propeller if the duct is 2.6 m in diameter and the ship is stationary.

Answers: 1

Show answers

Another question on Physics

Physics, 21.06.2019 16:00

The rigid beam is supported by the three suspender bars. bars ab and ef are made of aluminum and bar cd is made of steel. if each bar has a cross-sectional area of 450 mm2, determine the maximum value of p if the allowable stress is (σallow)st = 200 mpa for the steel and ( σallow)al = 150 mpa for the aluminum. est = 200 gpa and eal = 70 gpa.

Answers: 2

Answer

Physics, 21.06.2019 23:10

A248-g piece of copper is dropped into 390 ml of water at 22.6 °c. the final temperature of the water was measured as 39.9 °c. calculate the initial temperature of the piece of copper. assume that all heat transfer occurs between the copper and the water. remember, the density of water is 1.0 g/m

Answers: 1

Answer

Physics, 22.06.2019 01:00

An object is 10. cm from the mirror, its height is 3.0 cm, and the focal length is 2.0 cm. what is the image height? (indicate the object orientation by including the + or - sign with the answer.) hi = cm +1.33 -1.33 +0.75 -0.75

Answers: 2

Answer

Physics, 22.06.2019 06:30

Air initially at 0.75 bar, 1000 k, and occupying a volume of 0.12 m^3 undergoes two processes. process 1-2: the air is compressed isothermally until the volume is halved. process 2-3: the air undergoes a constant pressure process until the volume is halved again. assume ideal gas behavior. a) determine the mass of the air, in kg. b) the work and the heat transfer for each of the two processes, in kj. (100 kj = 1 bar . m^3)

Answers: 1

Answer

You know the right answer?

Transverse thrusters are used to make large ships fully maneuverable at low speeds without tugboat a...

Questions