Physics, 29.04.2021 18:00 taylabrown2013

What is the force between two protons that are separated by 1.0 mm? The charge of a proton is 1.6× 10 −19 1.6×10−19 C. (Round your answer to two significant figures.)

Answers: 2

Show answers

Answers

Answer from: Quest

the temperature and the pressure affect solubility. temperature affects by changing the properties of the solvent. the increase in pressure increases solubility, the decrease in pressure decreases solubility.

Answer from: Quest

force is based upon mass and acceleration.the statement is not always true.

it can be explained from newton's second law of motion.

as per newton's second law of motion the rate of change of momentum is directly proportional to the applied force and takes place along the direction of force.

mathematically it can be written as -

$f\alpha \frac{dp}{dt}$

⇒ $f= k \frac{dp}{dt}$

here k is the proportionality constant whose value is 1.

$f=\frac{dp}{dt}$

$f= \frac{d[mv]}{dt}$

$f= m\frac{dv}{dt} +v\frac{dm}{dt}$

$f=ma+v\frac{dm}{dt}$ [a is the acceleration=dv/dt]

hence we see that force not only depends on mass and acceleration but also on velocity and rate of change of mass. force f will depend on mass and acceleration only when mass is constant.

hence the statement that force is based upon mass and acceleration is false.

Answer from: Quest

Answer: a charge of -1.0 × 10⁻⁴ c must be placed at x = 26 m.the sign of the charge will be the same sign as the -4.0 µc charge.======electricstatic force between two point charges is given by $f = \dfrac{kq_1q_2}{r^2}$ where k is coulomb's constant, 8.99×10⁹ n·m²/c², q₁ and q₂ are the point charges, and r is the distance between the two point charges.assign positive to q₁let q₁ = 6.0 µc, q₂ = -4.0 µc, q₀ represent the charge at the origin, and q₃ represent this new charge to place.the charge at the origin q₀ would experience the following force f₀₁ from q₁, with r = 6.0 m (note that 1 µc = 10⁻⁶ c) $f_{01} = \dfrac{kq_0q_1}{(\text{6.0 m})^2}$ the force from q₂ $f_{02} = \dfrac{kq_0q_2}{(\text{15 m})^2}$ the force from q₃ $f_{03} = \dfrac{kq_0q_1}{(\text{26 m})^2}$ the net force on the origin charge, q₀, has to be zero for no electrostatic forcehaving an equation where k and q₀ can be divided out of the equation will allow us to solve for q₃ $\begin{aligned} f_{net} & = 0\\ f_{01} + f_{02} + f_{03} & = 0 \\ \dfrac{kq_0q_1}{(\text{6.0 m})^2} + \dfrac{kq_0q_2}{(\text{15 m})^2} + \dfrac{kq_0q_3}{(\text{26 m})^2} & = 0 \\ kq_0 \left( \dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2} + \dfrac{q_3}{(\text{26 m})^2}\right) & = 0 \\ \dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2} + \dfrac{q_3}{(\text{26 m})^2} & = 0 \end{aligned}$ isolating: $\begin{aligned} \dfrac{q_3}{(\text{26 m})^2} & = -\dfrac{q_1}{(\text{6.0 m})^2} - \dfrac{q_2}{(\text{15 m})^2} \\ q_3 & = -(\text{26 m})^2\left(\dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2}\right) \\ q_3 & = -(\text{26 m})^2\left(\dfrac{6.0\times10^{-6} \text{ c}}{(\text{6.0 m})^2} + \dfrac{-4.0\times10^{-6} \text{ c}}{(\text{15 m})^2}\right) \\ q_3 & = -1.0064888 \times 10^{-4}\text{ c} \\ q_3 & = -1.0\times 10^{-4}\text{ c} \end{aligned}$ a charge of -1.0 × 10⁻⁴ c must be placed at x = 26 m.the sign of the charge will be the same as the -4.0 µc charge

Answer from: Quest

Sound wavelength of visible light waves

Another question on Physics

Physics, 22.06.2019 06:30

Air initially at 0.75 bar, 1000 k, and occupying a volume of 0.12 m^3 undergoes two processes. process 1-2: the air is compressed isothermally until the volume is halved. process 2-3: the air undergoes a constant pressure process until the volume is halved again. assume ideal gas behavior. a) determine the mass of the air, in kg. b) the work and the heat transfer for each of the two processes, in kj. (100 kj = 1 bar . m^3)

Answers: 1

Answer

Physics, 22.06.2019 17:10

Both independent and dependent clauses

Answers: 1

Answer

Physics, 22.06.2019 19:40

It may seem strange that the selected velocity does not depend on either the mass or the charge of the particle. (for example, would the velocity of a neutral particle be selected by passage through this device? ) the explanation of this is that the mass and the charge control the resolution of the device--particles with the wrong velocity will be accelerated away from the straight line and will not pass through the exit slit. if the acceleration depends strongly on the velocity, then particles with just slightly wrong velocities will feel a substantial transverse acceleration and will not exit the selector. because the acc

Answers: 1

Answer

Physics, 23.06.2019 02:20

3. a particle with initial velocity v⃗ 0=(5.85×103m/s)j^ enters a region of uniform electric and magnetic fields. the magnetic field in the region is b⃗ =−(1.35t)k^. you can ignore the weight of the particle. a. calculate the magnitude of the electric field in the region if the particle is to pass through undeflected, for a particle of charge +0.640 nc.

Answers: 2

Answer

You know the right answer?

What is the force between two protons that are separated by 1.0 mm? The charge of a proton is 1.6× 1...

Questions