Physics, 28.04.2021 18:10 issaicnotisaac

Consider a collusion in one dimension that invoves two objects of masses 4.5 kg and 6.2 kg the larger mass is originally at rest, and the smaller mass has an initial velocity of 16 m/s [E]. the final velocity of the larger object is 10.0 m/s [E]. calculate the final velocity of the smaller object after the collision. HELP.

Answers: 1

Show answers

Answers

Answer from: Quest

it is very well related to a lot of things but with my limited knowledge i can confidently say that the answer is space.

Answer from: Quest

An atom (ours, not carroll's) consists of a positively charged nucleus, surrounded by one or more negatively charged particles called electrons. the positive charges equal the negative charges, so the atom has no overall charge; it is electrically neutral. most of an atom's mass is in its nucleus; the mass of an electron is only 1/1836 the mass of the lightest nucleus, that of hydrogen. although the nucleus is heavy, it is quite small compared with the overall size of an atom. the radius of a typical atom is around 0.1 to 0.25 nanometres (nm), whereas the radius of a nucleus is about 10-6 nm. * if an atom were enlarged to the size of the earth, its nucleus would be only 200 feet in diameter and could easily rest inside a small football stadium.read more on -

Answer from: Quest

answer; how far out of place which the object finished relative to the starting location;

Answer from: Quest

russian is not my first language, so i'm afraid i can't write out an answer in russian, but hopefully you can find a way to do so. here's my best translation of the problem: you're given a plot of a particle's position in one-dimensional space over time, and you're asked to find either the total distance traveled by the particle after 6 seconds had elapsed, or the total displacement of the particle after 6 seconds.

if you want the total distance traveled, you would first need to determine the particle's velocity as a function of time, then integrate that over the 6-second interval. we know the position function is quadratic with roots at 0 and 6, so we have

$x(t)=ax(x-6)$

where $a$ is unknown. because the position is parabolic, there is symmetry about the midpoint at $t=3$ , and we know that

$x(3)=10\implies -9a=10\implies a=-\dfrac{10}9$

so that the position function is

$x(t)=-\dfrac{10}9x(x-6)$

which means the velocity is

$v(t)=\dfrac{\mathrm dx}{\mathrm dt}=-\dfrac{20}9x+\dfrac{60}9$

then the total distance traveled is

$\displaystyle\int_{t=0}^{t=6}|v(t)|\,\mathrm dt=\left\{\int_{t-0}^{t=3}-\int_{t=3}^{t=6}\right\}v(t)\,\mathrm dt=20$

so the total distance traveled is 20 m.

on the other hand, if you want to find displacement: the particle starts at $x=0$ and ends at $x=0$ , so its displacement is 0.

Another question on Physics

Physics, 22.06.2019 10:30

Find the magnetic field a distance r from the center of a long wire that has radius a and carries a uniform current per unit area j in the positive z direction.

Answers: 2

Answer

Physics, 22.06.2019 16:00

State the following: boyle's law and charle's law

Answers: 2

Answer

Physics, 22.06.2019 21:20

Abeverage can is made of 3004-h19 aluminum alloy (elastic modulus 69 gpa, tensile yield strength 285 mpa, density 2.72 g/cm^3). the dimensions on the can are approximated as a thin-walled cylinder with a height of 4.83 inches, diameter of 2.60 inches. empty the can has a mass of 14.2 g. determine: a. the wall thickness of the cylinder b. assuming a pinned-pinned condition what is the critical load? c. assuming a fixed-fixed condition what is the critical load?

Answers: 1

Answer

Physics, 22.06.2019 23:40

Along wire of diameter 1 mm is submerged in an oil bath of temperature ∞ 31°c. the wire has an electrical resistance per unit length of 0.01 ω/m. if a current of 103 a flows through the wire and the convection coefficient is 500 w/m2·k, what is the steady-state temperature of the wire? from the time the current is applied, how long does it take for the wire to reach a temperature that is within 1°c of the steady-state value? the properties of the wire are 8000 kg/m3, 500 j/kg·k, and 20 w/m·k.

Answers: 3

Answer

You know the right answer?

Consider a collusion in one dimension that invoves two objects of masses 4.5 kg and 6.2 kg the large...

Questions