Apply the impulse-momentum relation and the work-energy theorem to calculate the maximum value of t if the cake is not to end up on the floor. assume that the cake moves a distance d while still on the tablecloth and therefore a distance r? d while sliding on the table top. assume that the friction forces are independent of the relative speed of the sliding surfaces. you can easily try this trick yourself by pulling a sheet of paper out from under a glass of water, but have a mop handy just in case!

The 5-kg cylinder is initially at rest when it is placed in contact with the wall b and the rotor at a. if the rotor always maintains a constant clockwise angular velocity v = 6 rad> s, determine the initial angular acceleration of the cylinder. the coefficient of kinetic friction at the contacting surfaces b and c is mk = 0.2.

Antireflective coatings on solar cells are often made by applying a thin film of silicon nitride (sinx), which has an index of refractive of 1.2, on the top of the silicon solar cell, which has a refractive index of about 3.5. however, the sun emits radiation of various wavelengths which the solar cell absorbs, and the antireflective coating can only absolutely minimize the reflection of one of these wavelengths. the coating thickness is chosen to reduce the reflection of green/yellow light (e = 2.2 ev), which is the most intense color in the solar spectrum (shown below). which of the following coatings would minimize reflection of green/yellow light? the answer is 820 nm how? what is the angular width of the central maximum of an electron traveling at 2 x 108 m/s going through a single slit of width 1 mm.

An air-filled capacitor is formed from two long conducting cylindrical shells that are coaxial and have radii of 26 mm and 103 mm. the electric potential of the inner conductor with respect to the outer conductor is - 700 v (k = 1/4πε 0 = 8.99 × 109 n · m2/c2) the energy stored in a 1.0-m length of this capacitor is closest to