subject
Physics, 02.02.2020 22:02 nininichole431

Acathode ray tube is made of glass with a small amount of some kind of gas in it. it has metal electrodes at each end to pick up an electric current. the electrodes are named "positiveā€ and "negative,ā€ which were words used by benjamin franklin in the 1700s to describe electricity. a bright ray forms in the gas when an electric current is applied to metal electrodes. in the 1800s, an important scientist suspected that the negatively charged particles in a cathode ray were present in all atoms. what procedure would allow that scientist to investigate this idea?

a)observing if the cathode ray forms when the electric current is off
b)making cathode ray tubes out of different materials to see if the ray is the same
c)using different magnets to see if the cathode ray responds in the same way to each
d)changing the strength of the electric current and observe how the ray forms and changes

ansver
Answers: 2

Another question on Physics

question
Physics, 22.06.2019 09:30
An electric clothes dryer has a resistance of 8 ohms. it draws 30 a of current. what is the voltage, in volts, of the wall outlet that it is plugged into?
Answers: 2
question
Physics, 22.06.2019 17:30
Chameleons catch insects with their tongues, which they can rapidly extend to great lengths. in a typical strike, the chameleon's tongue accelerates at a remarkable 220 m/s2 for 20 ms, then travels at constant speed for another 30 ms.
Answers: 1
question
Physics, 22.06.2019 18:50
Avertical clean glass piezometer tube has an inside diameter of d = 1 mm and is used to measure pressure in a horizontal pipe carrying water as shown. due to pressure in the pipe, the water at 20ļ‚°c rises into the tube to a height h. if the water pressure in the pipe is p = 500 pa gauge, estimate the height h: (a) without considering surface tension (b) with surface tension (capillary) effects. the contact angle ļ± can be assumed at 30 deg
Answers: 2
question
Physics, 22.06.2019 19:10
3. a worker pushes a 30.5 kg polished stone along a polished table with a force on bonin a straight line for 5.20 s after starting from rest. there is no friction between thestone and the table. at the end of the table. the stone is hooked to a cable with a lengthof 62.0 cm to rotate it to a rough table to store until they can be picked up. the roughtable has a coefficient of static friction 0.702 with the polished stone. remember that 8= 9.80 m/s2a) what is the speed of the stone when it is hooked to the cable? b) what is the tension in the cable while the stone is rotating? (there is still nofriction)c) how much force is needed to make the stone begin sliding from rest on therough table? ius = 0.70262.0 cm30.5 kg20.5 kg6= 0
Answers: 2
You know the right answer?
Acathode ray tube is made of glass with a small amount of some kind of gas in it. it has metal elect...
Questions
question
Mathematics, 12.12.2020 16:20
question
Mathematics, 12.12.2020 16:20
question
History, 12.12.2020 16:20
question
Mathematics, 12.12.2020 16:20