An elevator (mass 4125 kg) is to be designed so that the maximum acceleration is 0.0400g.
what is the maximum force the motor should exert on the supporting cable?
what is the minimum force the motor should exert on the supporting cable?

This is one type of line graph in which the independent variable is time plotted on the x axis and the dependent variable, also numerical, is plotted on the y axis.

Two cannon balls weighing 18 kg and 24 kg are chained together and fired horizontally with a velocity of 165 m/s from the top of a 21-m wall. the chain breaks during the flight of the cannonballs and the 18-kg cannonball strikes the ground at t = 1.5 s, at a distance of 240 m from the foot of the wall, and 7 m to the right of the line of fire. determine the position of the other cannonball at that instant. neglect the resistance of the air.

Ahair dryer is basically a duct in which a few layers of electric resistors are placed. a small fan pulls the air in and forces it through the resistors where it is heated. air enters a 1200 w hair dryer at 100 kpa and 22°c and leaves at 47°c. the cross-sectional area of the hair dryer at the exit is 60 cm2. neglecting the power consumed by the fan and the heat losses through the walls of the hair dryer, determine (a) the volume flow rate of air at the inlet and (b) the velocity of the air at the exit.