Physics, 16.09.2019 04:30 sweetieval17oz0f8q

Fill in the table (parallel circuit)
32ohms
32ohms
96v
voltage current resistance power

Answers: 1

Show answers

Answers

I don't see a table anywhere near here, but I think I can show you how to calculate those quantities.

From your description, I'm picturing two 32-ohm resistors in parallel, connected across a 96-volt battery or other power supply.

In parallel, each resistor has the same voltage across it. So it might be easier
if we begin by considering them separately:

Current through one resistor = V/R = 96/32 = 3 Amperes.
Current through both of them, supplied by the battery = 6 Amperes.

Power dissipated by one resistor = I² R = (3)² (32) = 9 x 32 = 288 watts.
Power dissipated by both of them, supplied by the battery = 576 watts.

Equivalent resistance as seen by the battery = (32)² / 64 = 16 ohms.

Check:

If the battery sees 16 ohms, then the current is V/R = 96/16 = 6 Amp.

Power supplied by the battery is (V x I) = 96 x 6 = 576 watts.

yay !

Note:
288 watts is a lot of power. You'll need big, expensive resistors,
possibly even immersed in an oil bath, unless your resistors are
coils of resistive wire and you plan on toasting bread with them.

Answer from: Quest

i dont know but

explanation:

whoever your teacher is, deserves a raise for using pokemon as an example

Answer from: Quest

electromagnetic shielding is the practice of reducing the electromagnetic field in a space by blocking the field with barriers made of conductive or magnetic materials. shielding is typically applied to enclosures to isolate electrical devices from their surroundings, and to cables to isolate wires from the environment through which the cable runs. electromagnetic shielding that blocks radio frequency electromagnetic radiation is also known as rf shielding.

the shielding can reduce the coupling of radio waves, electromagnetic fields and electrostatic fields. a conductive enclosure used to block electrostatic fields is also known as a faraday cage. the amount of reduction depends very much upon the material used, its thickness, the size of the shielded volume and the frequency of the fields of interest and the size, shape and orientation of apertures in a shield to an incident electromagnetic

from wikipedia

Another question on Physics

Physics, 22.06.2019 15:00

Give an example in which the electrical energy changes to light energy

Answers: 1

Answer

Physics, 22.06.2019 23:30

1. explain how you calculate the net force in any direction on the box. 2. suppose an upward force of 15n is added to the box. what will be the net vertical force on the box? 3. what force could be applied to the box to make the net force in the horizontal direction zero? explain. 4. suppose a force of 25n to the right is added to the box. what will be the net force to the right?

Answers: 3

Answer

Physics, 22.06.2019 23:30

You have two photos of a person walking. one shows the person at the corner of third and main streets, the other shows the person at the corner of tenth and main streets. there are lampposts at every corner in this town, and the first picture shows it to be 10: 32: 00 exactly. the second picture shows it to be 10: 49: 30. you know three facts: (1) all of the clocks are synchronized; (2) there are exactly 12 equal-sized blocks per kilometer in this town; and (3) the streets that cross main in this area are numbered consecutively, with no interruptions. what is the person’s average speed in kilometers per hour?

Answers: 2

Answer

Physics, 23.06.2019 00:20

The brightest star in the night sky in the northern hemisphere is sirius. its distance from earth is estimated to be 8.7 light years. a light year is the distance light travels in one year. light travels at a speed of 3.00 × 108 m/s. calculate the distance from earth to sirius in miles. (1 mi = 5280 ft) g

Answers: 2

Answer

You know the right answer?

Fill in the table (parallel circuit)
32ohms
32ohms
96v
voltage current res...

Questions