Agymnast with mass m1 = 43 kg is on a balance beam that sits on (but is not attached to) two supports. the beam has a mass m2 = 115 kg and length l = 5 m. each support is 1/3 of the way from each end. initially the gymnast stands at the left end of the beam.
1)what is the force the left support exerts on the beam?
2)what is the force the right support exerts on the beam?
3)how much extra mass could the gymnast hold before the beam begins to tip?
now the gymnast (not holding any additional mass) walks directly above the right support.

4)what is the force the left support exerts on the beam?
5)what is the force the right support exerts on the beam?

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm.   the wire diameter is d = 0.9 mm.   the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a                                          

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2)   in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation:

1/0.14nm = 10^10/1.4 a lot