A yo-yo is held by a steady hand and allowed to unwind from rest. The yo-yo has a mass m = 0.10 kg and a moment of inertia of 0.40mr 2 , where r is the radius of the inner spool that the string is wound around. Determine the acceleration of the yo-yo's center of mass and the tension in the string while it falls..

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

i believe it is b. what was the cause of the big bang

hope this !

explanation:

to push or pull an object in a certain direction is known as force. a force in moving an object from one place to another.

force depends on the mass of an object. so, more is the mass of an object more will be the force required to move the object.

thus, we can conclude that the use of force to move an object is push or pull.