A uniform disk with mass 100 kg and radius 1.0 m is spinning like a merry-go-round about a vertical axis through its center and perpendicular to the plane of the disk. It rotates at an initial angular speed of rad/s. A 40 kg mass of putty drops from above and lands on a point 0.50 m from the center from the disk and sticks to the disk. What is the final angular speed of the disk-putty system, in rad/s?

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

Velocity is a description of both speed and direction, therefore it - a vector - a force arrow - the same as acceleration - a magnitude

Avolcano erupts next to a grassland area in a valley. a. describe three ways in which material released by the volcano could impact the grassland area. b. describe three ways in which the grassland ecosystem could recover after a volcanic eruption.