GUYS PLEASE HELP ASAP

Draw a ray diagram to show the following terms:

Asteam power plant operates on an ideal reheat rankine cycle between the pressure limits of 15 mpa and 10 kpa. the mass flow rate of steam through the cycle is 12 kg/s. steam enters both stages of the turbine at 500°c. if the moisture content of the steam at the exit of the low-pressure turbine is not to exceed 10 percent, determine (a) the pressure at which reheating takes place, (b) the total rate of heat input in the boiler, and (c) the thermal efficiency of the cycle. also, show the cycle on a t-s diagram with respect to the saturation lines. (2.15 mpa; 45.0 mw; 42.6%)

Apotter's wheel moves uniformly from rest to an angular speed of 0.20 rev/s in 32.0 s. (a) find its angular acceleration in radians per second per second. rad/s2 (b) would doubling the angular acceleration during the given period have doubled final angular speed?

Ahot-air balloon takes off from the ground traveling vertically with a constant upward acceleration of magnitude g/4. after time interval δt, a crew member releases a ballast sandbag from the basket attached to the balloon. how many seconds does it take the sandbag to reach the ground? (express your answer in terms of δt)