What statement describes a proper throw-in?

If this plastic cup is heated to its melting point, what will eventually happen to all the particles in the plastic? a. the particles will begin to move enough that they slide past each other. b. bonds will form and the liquid will become a solid. c. the spaces between the particles will get smaller. d. the particles will change state and become a crystalline solid.

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

Rohit is trying to tune an instrument