Physics, 08.03.2021 05:30 dondre54

The pole in the figure is a a 90° bend in a power line and is therefore subjected to more shear force than poles in straight parts of the line. The tension in the two wires at the top of the pole is 3.5 × 104 N, and both wires are at an angle of 80° with respect to the pole. The pole is 15 m tall, has an 16 cm diameter and can be considered to have half the strength of hardwood (hardwood has a Young's modulus of 1.5×1010 N/m2 and a shear modulus of 1×010 N/m2). First ignore the guy wire (Tgw). Calculate the compression of the pole, in millimeters?

Still ignoring the guy wire, Find how much it bends in mm to the right?

Now find the tension in the guy wire used to keep the pole straight if it is attached to the top of the pole at an angle of 30° with the vertical in Newtons? (The guy wire must be in the opposite direction of the bend.)

Answers: 2

Show answers

Another question on Physics

Physics, 21.06.2019 23:30

Which is the best for showing percentages of different types of cars sold(gas hybrid , electric , other ) in the united states ?

Answers: 3

Answer

Physics, 22.06.2019 14:40

A5 foot by 5 foot box culvert is buried 6 feet beneath the surface of the ground. a crosssection of this very long culvert (into and out of the page) is illustrated below. assume that the soil in which the culvert is buried has the following properties: jt = 120 pcf, w = 12%, ko = 0.50, ka = 0.33, and kp = 3.00. calculate the total horizontal force per unit length of culvert (fh) felt on one of the vertical faces of the culvert.

Answers: 1

Answer

Physics, 22.06.2019 17:30

You can watch static electricity in action by rubbing an inflated balloon against your hair. your hair will actually stand on its end! it does this because each hair becomes charged, and they all repel one another.

Answers: 3

Answer

Physics, 22.06.2019 19:20

Aproduction line at v. j. sugumaran's machine shop has three stations. the first station can process a unit in 7 minutes. the second station has two identical machines, each of which can process a unit in 16 minutes (each unit only needs to be processed on one of the two machines). the third station can process a unit in 10 minutes. ▼ is the bottleneck station, with a bottleneck time of nothing minutes per unit (enter your response as a whole number).

Answers: 3

Answer

You know the right answer?

The pole in the figure is a a 90° bend in a power line and is therefore subjected to more shear forc...

Questions