A 1.0 Kg object, A, with a velocity of 4.0ms-1 to the right, strikes a second object, B, of mass 3.0 Kg, originally at rest. In the collision, A is deflected

from its original direction through an angle of 50°; its speed after the

collision is 2.0ms-1. Find the angle between B’s velocity after the collision

and the original direction of A, and find the speed of B after collision​

State one advantage and one disadvantage of using a plane mirrior as a driving mirrior

In a wind tunnel the speed changes as the cross sectional area of the tunnel changes. if the speed in a 6' x 6' square test section is 100 mph, what was the speed upstream of the test section where the tunnel measured 20' x 20'? use conservation of mass and assume incompressible flow. conservation of mass requires that as the flow moves through a path or a duct the product of the density, velocity and cross sectional area must remain constant; i.e., that ova-constant. a model is being tested in a wind tunnel at a speed of 100 mph if the flow in the test section is at sea level standard conditions, what is the pressure at the model's stagnation point? (a) the tunnel speed is being measured by a pitot-static tube connected to a u- tube manometer. what is the reading on that manometer in inches of water? (b) at one point on the model a pressure of 2058 psf is measured. what is the local airspeed at that point?

Which simple machine is not part of this compound machine? a. lever b. pulley c. inclined plane d. wheel and axle