What are the four ways to know if the motion of an object at rest is influenced?

For problems 1-3, consider a simple dc brush motor with a permanent magnet stator. with an an consider a simple dc brush motor with a permanent magnet ae supply voltage of 100 v, the no-load speed of the motor is 1000 rpm. this motor can provide a torque of 1.9 n-m at 800 rpm drawing a current of 2 a current are both zero at no load.) 1. with an armature supply voltage of 100 v, the motor is operated at 900 rpm. what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input? what is the energy efficiency of the motor? with an armature supply voltage of 100 v, the motor is operated at 1100 rpm (where it acts as a generator). what torque input is required? what mechanical power is required what current is generated? what is the electrical power generated? what is the energy efficiency of the motor acting as a generator? 2. with an armature supply voltage raised to 120 v, the motor is operated at 1000 rpm. what is the no-load speed? what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input what is the energy efficiency of the motor? 3.

Asemipermeable membrane is placed between the following solutions. which solution will decrease in volume? solution a: 1.4% (m/v) starch solution b: 7.62% (m/v) starch

Suppose that a cylindrical tank 6 meters high with a radius of 2 meters is filled to the rim with water. the tank is buried so that the top of the tank is 1 meter below ground level. the space above the tank is not filled with water. calculate how much work needs to be done by a pump to pump the water out of the tank up to ground level. (the water weighs 9,800 newtons per cubic meter.)