Appliances connected so that they form a single pathway for charges to flow are connected in a(n)
A. series circuit.
B. parallel circuit.
C. off circuit.
D. open circuit

Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.

In a set amount of time, a battery supplies 25j of energy to an electric circuit that includes two different loads. one of the loads produces 10 j of heat energy during this time interval. how much heat energy is produced by the second load in this time? explain your answer

The great sandini is a 60.0-kg circus performer who is shot from a cannon (actually a spring gun). you don’t find many men of his caliber, so you him design a new gun. this new gun has a very large spring with a very small mass and a force constant of 1100 n/m that he will compress with a force of 4400 n. the inside of the gun barrel is coated with teflon, so the average friction force will be only 40.0 n during the 4.00 m he moves in the barrel. at what speed will he emerge from the end of the barrel, 2.50 m above his initial rest position?