Give the reasons for the following features of the thermometer :
a. a bulb of thin glass
b. t...
Physics, 15.01.2021 02:20 alyssadgonzalez
Give the reasons for the following features of the thermometer :
a. a bulb of thin glass
b. the constriction near the bulb
c. a tube of fine bore
Answers: 1
Physics, 22.06.2019 12:00
Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.
Answers: 1
Physics, 22.06.2019 17:50
If there's a small amount of friction between two surfaces, the result could be select all that applya. no movement b. heatc. a little bit of movementd. sliding around
Answers: 2
Physics, 22.06.2019 18:00
Can you receive a shock severe enough to prevent you from releasing the wire from an ordinary outlet with dry hands? a. no b. yes explain
Answers: 1
Physics, 22.06.2019 19:50
An air-filled capacitor is formed from two long conducting cylindrical shells that are coaxial and have radii of 26 mm and 103 mm. the electric potential of the inner conductor with respect to the outer conductor is - 700 v (k = 1/4πε 0 = 8.99 × 109 n · m2/c2) the energy stored in a 1.0-m length of this capacitor is closest to
Answers: 1
History, 05.05.2020 07:26
Mathematics, 05.05.2020 07:26
Mathematics, 05.05.2020 07:26
Mathematics, 05.05.2020 07:26
Mathematics, 05.05.2020 07:26
Health, 05.05.2020 07:26