In the following figure, if AB ǁ CD, then find the measure of PCD and CPD.

Stion 13 of 20 : select the best answer for the question. 13. if a certain mass of mercury has a volume of 0.002 m3 at a temperature of 20°c, what will be the volume at 50°c? a. 0.002021624 m3 b. 0.004021624 m3 c. 0.000010812 m3 d. 0.002010812 m3

Iron reacts with sulfur to form iron sulfide. if 60 grams of iron reacts with sulfur to produce 90 grams of iron sulfide, how much sulfur has been used in the chemical reaction?

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)