1) How is the magnitude of the applied force and the spring force, also known as the restoring force related? 2) Do the applied force and spring force act along the same direction?
3) Does a higher value of k result in a stiffer/less stretchy spring, or a less stiff/more stretchy spring?
4) How is the displacement and applied force related?
5) How does the proportionality region change in the Hooke’s law graph change with respect to increase in spring constant, k?

An object thrown vertically upward from the surface of a celestial body at a velocity of 36 m/s reaches a height of sequalsminus0.9tsquaredplus36t meters in t seconds. a. determine the velocity v of the object after t seconds. b. when does the object reach its highest point? c. what is the height of the object at the highest point? d. when does the object strike the ground? e. with what velocity does the object strike the ground? f. on what intervals is the speed increasing?

Amanometer is used to measure the air pressure in a tank. the fluid used has a specific gravity of 1.25, and the differential height between the two arms of the manometer is 34 in. if the local atmospheric pressure is 12.7 psia, determine the absolute pressure in the tank for the cases of the

Suppose that two tanks, 1 and 2, each with a large opening at the top, contain different liquids. a small hole is made in the side of each tank at the same depth 1.57 m below the liquid surface, but the hole in tank 2 has 2.49 times the cross-sectional area of the hole in tank 1. (a) what is the ratio ρ1/ρ2 of the densities of the liquids if the mass flow rate is the same for the two holes? (b) what is the ratio rv1/rv2 of the volume flow rates from the two tanks? (c) at one instant, the liquid in tank 1 is 14.9 cm above the hole. if the tanks are to have equal volume flow rates, what height above the hole must the liquid in tank 2 be just then?