Energy Conservation With Conservative Forces: If a spring-operated gun can shoot a pellet to a maximum height of 100 m on Earth, how high could the pellet rise if fired on the Moon, where g

h' = 603.08 m

Explanation:

First, we will calculate the initial velocity of the pellet on the surface of Earth by using third equation of motion:

2gh = Vf² - Vi²

where,

g = acceleration due to gravity on the surface of earth = - 9.8 m/s² (negative sign due to upward motion)

h = height of pellet = 100 m

Vf = final velocity of pellet = 0 m/s (since, pellet will momentarily stop at highest point)

Vi = Initial Velocity of Pellet = ?

Therefore,

(2)(-9.8 m/s²)(100 m) = (0 m/s)² - Vi²

Vi = √(1960 m²/s²)

Vi = 44.27 m/s

Now, we use this equation at the surface of moon with same initial velocity:

2g'h' = Vf² - Vi²

where,

g' = acceleration due to gravity on the surface of moon = 1.625 m/s²

h' = maximum height gained by pellet on moon = ?

Therefore,

2(1.625 m/s²)h' = (44.27 m/s)² - (0 m/s)²

h' = (1960 m²/s²)/(3.25 m/s²)

h' = 603.08 m

dicrrdirrkdirckrrdrrk ; jhgfdsgrthyjkul; i'lkjhgfdskhjl; jhgdfs

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm.   the wire diameter is d = 0.9 mm.   the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a                                          

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2)   in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation: