Quiz navigation Question 1
A 1.0 kg block is pressed against a spring that has been compressed 10 cm. If the spring
has a spring compression equation of (F = 1000x) and when released causes the block to
slide along a frictionless horizontal surface and then up a frictionless incline:
1
Not yet
answered
2.
3
Marked out of
4.00
Finish attempt...
Flag question
*Note: Show all of your work/calculations
(a) Determine the velocity of the block the instant it leaves the spring.
(b) Determine the maximum height that will be reached by the block while on the incline.
(c) The total energy possessed by the block when it is located half way up the incline.
1
A-
B
1
&
$$

An airplane flying parallel to the ground undergoes two consecutive displacements. the first is 76 km at 39.8◦ west of north, and the second is 156 km at 59.9◦ east of north. what is the magnitude of the plane’s total displacement? answer in units of km. 020 (part 2 of 2) 10.0

Calculate the work done by an external agent during an isothermal compression of 1.00 mol of oxygen from a volume of 22.4 l at 10∘c and 1.0 atm pressure to 16.8l

Some material consisting of a collection of microscopic objects is kept at a high temperature. a photon detector capable of detecting photon energies from infrared through ultraviolet observes photons emitted with energies of 0.3 ev, 0.5 ev, 0.8 ev, 2.0ev, 2.5ev, and 2.8ev. these are the only photon energies observed. (a) draw and label a possible energy-level diagram for one of the microscopic objects, which has four bound states. on the diagram, indicate the transitions corresponding to the emitted photons. explain briefly. (b) would a spring–mass model be a good model for these microscopic objects? why or why not? (c) the material is now cooled down to a very low temperature, and the photon detector stops detecting photon emissions. next, a beam of light with a continuous range of energies from infrared through ultraviolet shines on the material, and the photon detector observes the beam of light after it passes through the material. what photon energies in this beam of light are observed to be significantly reduced in intensity (“dark absorption lines”)? explain briefly.