Gravity on earth is 9.8 m/s^2, and gravity on jupiter is 23.1 m/s^2. so, if the mass of a rock is 70 kilograms, it's weight on earth and its weight on jupiter ?

For problems 1-3, consider a simple dc brush motor with a permanent magnet stator. with an an consider a simple dc brush motor with a permanent magnet ae supply voltage of 100 v, the no-load speed of the motor is 1000 rpm. this motor can provide a torque of 1.9 n-m at 800 rpm drawing a current of 2 a current are both zero at no load.) 1. with an armature supply voltage of 100 v, the motor is operated at 900 rpm. what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input? what is the energy efficiency of the motor? with an armature supply voltage of 100 v, the motor is operated at 1100 rpm (where it acts as a generator). what torque input is required? what mechanical power is required what current is generated? what is the electrical power generated? what is the energy efficiency of the motor acting as a generator? 2. with an armature supply voltage raised to 120 v, the motor is operated at 1000 rpm. what is the no-load speed? what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input what is the energy efficiency of the motor? 3.

Aballoon is rising vertically upwards at a velocity of 10m/s. when it is at a height of 45m from the ground, a parachute bails out from it. after 3s he opens his parachute and decelerates ata a constant rate 5m/s.when. (a) what was the height of the parachutist above the ground when he opened his parachute? (b)how far is the parachutist from the balloon at t=3s? (c)with what velocity does the parachutist hit the ground? (d)after how long does the parachutist hit the ground after his exist from the balloon?

In the illustration, which two simple machines are being used to enable the student to reach the door? a. inclined plane and pulley b lever and wheel-and-axle c pulley and lever d wheel-and axle and inclined plane