subject
Physics, 02.11.2020 05:00 JussSplash1340

If you shine a laser on two slits with a separation of 0.185 mm, and the angle of second order maximum is 0.188 degrees, what is the wavelength of the laser light?

ansver
Answers: 2

Another question on Physics

question
Physics, 22.06.2019 00:30
Aball tossed vertically upward from the ground next to a building passes the bottom of a window 1.8 s after being tossed and passes the top of the window 0.20 s later. the window is 2.0 m high from top to bottom. what was the ball's initial velocity? the unit vector j^ is directed upward. how far is the bottom of the window from the launch position? how high does the ball rise above the launch position?
Answers: 1
question
Physics, 22.06.2019 06:20
Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so it is no surprise that such clothing has largely replaced thickand heavy old-fashioned coats. (a) consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 w/m·°c) with 1.5-mm-thick air space (k = 0.026 w/m·°c) between the layers. assuming the inner surface temperature of the jacket to be 28°c and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°c and the heat transfer coefficient at the outer surface is 25 w/m2·°c. (b) what would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? what should be the thickness of a wool fabric (k = 0.035 w/m·°c) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a five-layer ski jacket?
Answers: 1
question
Physics, 22.06.2019 08:00
1.what is where an object is located 2. what is how fast an objects speed is changing 3. what is how fast an object is moving
Answers: 1
question
Physics, 22.06.2019 08:40
The system is released from rest with the cable taut, and the homogeneous cylinder does not slip on the rough incline. determine the angular acceleration of the cylinder and the minimum coeffi cient s of friction for which the cylinder will not slip.
Answers: 2
You know the right answer?
If you shine a laser on two slits with a separation of 0.185 mm, and the angle of second order maxim...
Questions
question
English, 18.12.2020 06:00
question
Spanish, 18.12.2020 06:00
question
Mathematics, 18.12.2020 06:00
question
Mathematics, 18.12.2020 06:00
question
Biology, 18.12.2020 06:00
question
English, 18.12.2020 06:00