Physics, 28.10.2020 22:50 kate5895

An object is accelerating if there is a change in speed and which factor? A. direction B. displacement C. time D. position

Answers: 2

Show answers

Another question on Physics

Physics, 21.06.2019 22:10

The car hoist allows the car to be driven onto the platform, after which the rear wheels are raised. if the loading from both rear wheels is 1380 lb, determine the force in the hydraulic cylinder ab. neglect the weight of the platform itself. member bcd is a right-angle bell crank pinned to the ramp at c. the force is positive if in tension, negative if in compression.

Answers: 2

Answer

Physics, 21.06.2019 22:50

Moon effect. some people believe that the moon controls their activities. if the moon moves from being directly on the opposite side of earth from you to being directly overhead, by what percentage does (a) the moon's gravitational pull on you increase and (b) your weight (as measured on a scale) decrease? assume that the earth–moon (center-to-center) distance is 3.82 × 10^8 m, earth's radius is 6.37 × 10^6 m, moon's mass is 7.36 × 10^22 kg, and earth's mass is 5.98 × 10^24 kg.

Answers: 2

Answer

Physics, 22.06.2019 13:50

Two students, each riding bicycles, start from the same apartment building and ride to the same building on campus, but each takes a different route. the first student rides 1100 m due east and then turns due north and travels another 1430 m before arriving at the destination. the second student heads due north for 1930 m and then turns and heads directly toward the destination.at the turning point, how far is the second student from the destination?

Answers: 3

Answer

Physics, 22.06.2019 18:00

Air enters a gas turbine with two stages of compression and two stages of expansion at 100 kpa and 17°c. this system uses a regenerator as well as reheating and intercooling – the intercooler returns the air to the inlet temperature. the pressure ratio across each compressor is 4 ; 300 kj/kg of heat are added to the air in each combustion chamber; and the regenerator operates perfectly while increasing the temperature of the cold air by 20°c. determine the system’s thermal efficiency. assume isentropic operations for all compressor and the turbine stages and use constant specific heats at room temperature. (0.378)

Answers: 3

Answer

You know the right answer?

An object is accelerating if there is a change in speed and which factor? A. direction B. displaceme...

Questions