subject
Physics, 27.10.2020 17:30 Shayleechase

A cylinder is filled with 10.0L of gas and a piston is put into it. The initial pressure of the gas is measured to be 126.kPa. The piston is now pushed down, compressing the gas, until the gas has a final volume of 3.30L. Calculate the final pressure of the gas. Be sure your answer has the correct number of significant digits.

ansver
Answers: 2

Another question on Physics

question
Physics, 22.06.2019 05:00
Aperson standing in a canoe exerts a force of 700 n to throw an anchor over the side. find the acceleration of the canoe if the total mass of the canoe and the person is 100 kg?
Answers: 1
question
Physics, 22.06.2019 10:20
Asmall object with mass 0.200 kg swings back and forth on the lower end of a light rope that is 3.00 m long. the upper end of the rope is attached to the ceiling. as the object swings through its lowest position, where the rope is vertical, the speed of the object is 5.80 m/s. at this point in the motion, what is the tension in the rope? (use g = 9.80 m/s2.)
Answers: 2
question
Physics, 22.06.2019 12:00
In a set amount of time, a battery supplies 25j of energy to an electric circuit that includes two different loads. one of the loads produces 10 j of heat energy during this time interval. how much heat energy is produced by the second load in this time? explain your answer
Answers: 3
question
Physics, 22.06.2019 15:00
What pressure difference is required between the ends of a 2.0-m-long, 1.0-mm-diameter horizontal tube for 40 c water to flow through it at an average speed of 4.0 m/s?
Answers: 1
You know the right answer?
A cylinder is filled with 10.0L of gas and a piston is put into it. The initial pressure of the gas...
Questions
question
English, 15.04.2020 03:05
question
Physics, 15.04.2020 03:05