During your summer internship for an aerospace company, you are asked to design a small research rocket. The rocket is to be launched from rest from the earth's surface and is to reach a maximum height of 950 m above the earth's surface. The rocket's engines give the rocket an upward acceleration so it moves with acceleration of 16.0 m/s2 during the time T that they fire. After the engines shut off, the rocket is in free fall. Ignore air resistance. Assume that the acceleration due to gravity does not change with the height of the rocket. Required:
What must be the value of T in order for the rocket to reach the required altitude?

An internally reversible refrigerator has a modified coefficient of performance accounting for realistic heat transfer processes of where qin is the refrigerator cooling rate, qout is the heat rejection rate, and is the power input. show that copm can be expressed in terms of the reservoir temperatures tc and th, the cold and hot thermal resistances rt,c and rt,h, and qin, as where rtot rt,c rt,h. also, show that the power input may be expressed as 1.39 a household refrigerator operates with cold- and hot-temperature reservoirs of tc 5 c and th 25 c, respectively. when new, the cold and hot side resistances are rc,n 0.05 k/w and rh,n 0.04 k/w, respectively. over time, dust accumulates on the refrigerator’s condenser coil, which is located behind the refrigerator, increasing the hot side resistance to rh,d 0.1 k/w. it is desired to have a refrigerator cooling rate of qin 750 w. using the results of problem 1.38, determine the modified coefficient of performance and the required power input w under (a) clean and (b) dusty coil conditions. internally reversible refrigerator qout qin w high-temperature reservoir low-temperature reservoir th th,i tc,i tc high-temperature side resistance low-temperature side resistance w qin th tc qinrtot tc qinrtot copm tc qinrtot th tc

Apropagating wave in space with electric and magnetic components. these components oscillate at right angles to each other. it may travel in a vacuum. determine the term.

Suppose that a cylindrical tank 6 meters high with a radius of 2 meters is filled to the rim with water. the tank is buried so that the top of the tank is 1 meter below ground level. the space above the tank is not filled with water. calculate how much work needs to be done by a pump to pump the water out of the tank up to ground level. (the water weighs 9,800 newtons per cubic meter.)