subject
Physics, 22.09.2020 08:01 ThousandSeas9381

You are hired to plan stunts for the next James Bond movie. In one of the film's opening scenes, Bond is going to evade some goons by stepping off a building and landing in the bed of a moving garbage truck. From the top of the building, he will fall 15 meters straight down before landing in the truck, which will be driving by with a constant speed of 22 m/s. Part A. How fast will the stuntman be moving the moment he hits the truck?Part B. How far from the building should the truck be when you give the stuntman the signal to drop off the ledge?

ansver
Answers: 1

Another question on Physics

question
Physics, 21.06.2019 16:30
When a neutrally charged atom loses an electron to another atom, the result is the creation of a. two charged atoms. b. two negatively charged atoms. c. two positively charged atoms. d. two neutrally charged atoms.
Answers: 1
question
Physics, 22.06.2019 06:20
Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so it is no surprise that such clothing has largely replaced thickand heavy old-fashioned coats. (a) consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 w/m·°c) with 1.5-mm-thick air space (k = 0.026 w/m·°c) between the layers. assuming the inner surface temperature of the jacket to be 28°c and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°c and the heat transfer coefficient at the outer surface is 25 w/m2·°c. (b) what would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? what should be the thickness of a wool fabric (k = 0.035 w/m·°c) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a five-layer ski jacket?
Answers: 1
question
Physics, 22.06.2019 06:30
What are similarities and differences between refraction, reflection, diffraction and absorption?
Answers: 3
question
Physics, 22.06.2019 15:00
What pressure difference is required between the ends of a 2.0-m-long, 1.0-mm-diameter horizontal tube for 40 c water to flow through it at an average speed of 4.0 m/s?
Answers: 1
You know the right answer?
You are hired to plan stunts for the next James Bond movie. In one of the film's opening scenes, Bon...
Questions
question
Mathematics, 11.01.2020 05:31