The purpose of an experiment is to gather data to determine if the is supported or not supported

Total solidification times of three casting geometries are to be compared: a sphere, a cylinder, in which the length-to-diameter ration - 1.0, and a cube. volume = 1000 cm^3 for all three shhapes, and the same casting alloy is used. a) determine the solidification times of each geometry b) based on the results of part (a), which geometric element would make the best riser? c) if the mold constant = 3.5 min/cm^2 in chvorinov's rule, compute the total solidification time for each casting.

Awater-filled u-tube manometer is used to measure the pressure inside a tank that contains air. the water level in the u-tube on the side that connects to the tank is 5 ft above the base of the tank. the water level in the other side of the u-tube (which is open to the atmosphere) is 2 ft above the base. determine the pressure within the tank.

Find the dimensions and area of the largest rectangle that can be inscribed in the upper half of the ellipse. (give your answers in terms of a and b. enter the dimensions as a comma-separated list.)